The CL-S700 is designed with Easy Access in mind from the very beginning.
Our
Hi-Open™ case opens “vertically” meaning
that the footprint of the printer does not increase
when the cover is open. The printer can be placed
between a wall and computer case, for example, and still the
case can be opened for media loading.
Ribbon loading is equally quick and easy with
the Hi‑Lift™ metal mechanism opening to a full 90° to
allow for easy ribbon access.
Ribbons are simply wrapped around
the printhead with no need to feed through a complex mechanism
The CL-S700 works with ribbons up
to 450 metres long (1476
feet) either inside or outside wound for maximum flexibility
and minimum downtime.
If you're in the courier or logistics market or an application where direct thermal printing is perfectly acceptable, then our CL‑S700DT direct thermal model is ideal.
Naturally, an industrial strength printer
comes in a heavy duty metal enclosure to
ensure reliable and uninterrupted operation.
The printer can hold a full-sized roll of media (8 inches
or 200mm outside diameter) on a small core (1 inch or 25mm)
for maximum operational up-time.
This
also make media loading simple with unobstructed access to
the media path.
Continuing the idea of simple, easy access
the power switch is conveniently located at the front of
the printer. Above is the large graphic LCD for
clear indication of printer status and easy printer configuration.
As well as indicating the printer's current status, like "Media
Out" or "OnLine Ready", the LCD panel can
be used to make minor adjustments and configurations to the
printer, quickly and easily in a logical and simple-to-use
menu system.
When you have finished changing the media, the
top cover closes gently for both user safety and user courtesy.
Our ARCP™ ribbon system - Active
Ribbon Control & Positioning -
completely eliminates ribbon wrinkle and media slippage on
small or specialist media, especially important for longer
ribbons.
Standard connectivity on most models is by parallel, serial and
USB interfaces and optional Ethernet and
Wireless LAN cards can be installed, even by a
user.
Front Loading Internal Rewinder: For easy rewinding of either the liner in peel mode or printing of batches of labels, the front of CL‑S700R version of our printer drops down for the simplest rewinder operation ever seen!
Cross-Emulation™: Supports both Datamax® and Zebra® emulations. If the printer is in standard mode and Zebra ZPL-II® code is sent to the printer, the printer will display a message and offer to switch emulations automatically.
For high-resolution output, the CL‑S703 and CL‑S703R models features a 300 dpi printhead. 300 dpi printing is suitable for three main areas:
Compliance with EAN barcode standards used in the retail industry
Printing of small barcodes (due to space restrictions)
High-quality graphics and logos such as serial number rating plates, CE or WEEE logos, etc.
