The MediaWinder MW115 and MW215 are compact size, high performance rewinders for collecting label output from Citizen label printers.

Our rewinders use a simple, integrated, mechanical clutch on the media spindle to adjust the tension applied to the roll as it winds. This is instead of a ‘floating arm’ or electronic sensing which are less reliable or cause pulsing and tugging on the media.

The variable tension can be easily increased or decreased using the torque adjuster on the end of the media bar

 Easy-to-use design

 No tension control arm to interfere with the rewinding process

 Roll capacity up to 6 inches / 150 mm outside diameter

 Media width up to 4.75 inches / 120 mm

 Core size of 1.5 inches / 38 mm as standard

 Paper can be wound tight or loose by adjusting torque setting

 Quick and easy media setting using media clamp

 Equally easy to remove by simply sliding out the media clamp.
 

There are two versions of the Citizen MediaWinder:

 The MediaWinder MW115 is designed for printers printing at 4 inches per second such as the CLP 521, CLP 621 and CLP 631

 The MediaWinder MW215 is designed for printers printing at 7 inches per second such as the CLP 7201e, CLP 7202e and CL-S700